Details
The SP 3 Dirt can pump 7,000 litres of water and hour, making it very effective. This pump can be used to clean your pond, empty a pool, or to tackle a flooded area. This pump can also tackle clean water if required. The SP 3 uses a float switch to automatically turn itself on, if an area starts to flood. This float switch can also be held in place above the pump to clear the last remaining water, however you must monitor the pump when doing so. This SP 3 can deal with dirt particles up to 20mm in diameter. It comes with a G1 thread connector. You can use a standard garden hose to pump the water away if required, using a tap adaptor to connect the hose to the pump.
Additional
application | Domestic water pump |
---|---|
features | Designed for dirty water Reliable pumping of water with dirt particles up to 20mm in size. Possibility of fixing the float switch in place For switching to continuous operation. Comfortable carry handle Comfortable to hold and can also be used as a rope holder. Sturdy and easy to attach a pre-filter, available as an accessory Protects the pump against large dirt and therefore protects the pump impeller from becoming blocked. |
technical | Technical data Max. motor rating (W) 350 Max. flow rate (l/h) 7000 Delivery head/pressure, max. (m/bar) 6 / 0.6 Max. depth of immersion (m) 7 Max. grain size (mm) 20 Residual water height (mm) 25 Delivery temperature, max. (°C) 35 Power cable (/m) H05RN-F / 10 Voltage (V) 230 - 240 Frequency (Hz) 50 Weight without accessories (kg) 4.2 Dimensions (L x W x H) (mm) 229 x 238 x 303 |
Drive | Adv 110V |
Tank Fresh / Recovered Water (l) | - / - |
Working Width (mm) | - / - / - |
Dimensions | L x W x H |
Vacuum (mbar/kPa | - / - |
Power (V/W) | - / - |